1.刀口型直尺:knife straigjht edge

　　2.刀口尺: knife straigjht edge

　　3.三棱尺three edges straigjht edge

　　4.四棱尺four edges straigjht edge

　　5.條式和框式水平儀bar form and square levels

　　6.合像水平儀imaging level meter

　　7鑄鐵平板cast iron surface plate

　　8.巖石平板granite surface plate

　　9.鑄鐵平尺cast iron straigjht edge

　　10.鋼平尺和巖石平尺steel and granite straigjht edge

　　11.圓度儀roundness measuring instrument

　　12.電子水平儀electronic level meter

　　13.表面粗糙度比較樣塊鑄造表面roughness comparison specimens cast surface

　　14.表面粗糙度比較樣塊磨、車、銑、插及刨加工表面roughness comparison specimens-ground,turned,bored,milled,shape and planed

　　15.表面粗糙度比較樣塊電火花加工表面roughness comparison specimens spark-erostion machining surfaces

　　16.表面粗糙度比較樣塊拋光加工表面roughness comparison specimens pollshed surfaces

　　17.接觸式儀器的標稱特性

　　18.輪廓profiles

　　19.軌跡輪廓traced profile

　　20.基準輪廓reference profile

　　21.總輪廓total profile

　　22.原始輪廓primary profile

　　23.殘余輪廓residual profile

　　24.觸針式儀器stylus instrument

　　25.感應位移數字存儲觸針式量儀displacement sensitive,digitally storing stylus instrument

　　26.觸針式儀器的部件stylus instrument components

　　27.測量環measurement loop

　　28.導向基準renfence guide

　　29.驅動器drive unit

　　30.測頭(傳感器) probe(pick-up)

　　31.拾取單元tracing element

　　32.針尖stylus tip

　　33.轉換器transducer

　　34.放大器amplifier

　　35.模/數轉換器analog-to-digital converter

　　36.數據輸入data input

　　37.數據輸出data output

　　38.輪廓濾波和評定profile filtering and evaluation

　　39.輪廓記錄器profile recorder

　　40.儀器的計量特性metrological characteristics of the instrument

　　41.靜測力的變化change of static measuring force

　　42.靜態測力static measuring force

　　43.動態測量力dynamic measuring force